For the second year in a row Question 5 has been a geometry problem; and for the second year in a row I presented the video solution; and the for the second year in a row I received the question(s) while I was abroad. You can see the video solutions for all the questions here (for now). I had a think about Q5 and Q6 on the train back from a day out at Lake Balaton in Western Hungary, so in keeping with last year’s corresponding post, here are some photos from those sunnier days.

I didn’t enjoy this year’s geometry quite as much as last year’s, but I still want to say some things about it. At the time of writing, I don’t know who proposed Q5, but in contrast to most geometry problems, where you can see how the question might have emerged by tweaking a standard configuration, I don’t have a good intuition for *what’s really going on* here. I can, however, at least offer some insight into why the ‘official’ solution I give on the video has the form that it does.

The configuration given is very classical, with only five points, and lots of equal angles. The target statement is also about angles, indeed we have to show that a particular angle is a right-angle. So we might suspect that the model approach might well involve showing some other tangency relation, where one of the lines AC and BC is a radius and the other a tangent to a relevant circle. I think it’s worth emphasising that throughout mathematics, the method of solving a problem is likely to involve similar objects to the statement of the problem itself. And especially so in competition problems – it seemed entirely reasonable that the setter might have found a configuration with two corresponding tangency relations and constructed a problem by essentially only telling us the details of one of the relations.

There’s the temptation to draw lots of extra points or lots of extra lines to try and fit the given configuration into a larger configuration with more symmetry, or more suggestive similarity [1]. But, at least for my taste, you can often make a lot of progress just by thinking about what properties you want the extra lines and points to have, rather than actually drawing them. Be that as it may, for this question, I couldn’t initially find anything suitable along these lines [2]. So we have to think about the condition.

But then the condition we’ve been given involves areas, which feels at least two steps away from giving us lots of information about angles. It doesn’t feel likely that we are going to be able to read off some tangency conditions immediately from the area equality we’ve been given. So before thinking about the condition too carefully, it makes sense to return to the configuration and think in very loose terms about how we might prove the result.

How do we actually prove that an angle is a right-angle? (*) I was trying to find some tangency condition, but it’s also obviously the angle subtending by the diameter of a circle. You could aim for the Pythagoras relation on a triangle which includes the proposed right-angle, or possibly it might be easier to know one angle and two side-lengths in such a triangle, and conclude with some light trigonometry? We’ve been given a condition in terms of areas, so perhaps we can use the fact that the area of a right-angled triangle is half the product of the shorter side-lengths? Getting more exotic, if the configuration is suited to description via vectors, then a dot product might be useful, but probably this configuration isn’t.

The conclusion should be that it’s not obvious what sort of geometry we’re going to need to do to solve the problem. Maybe everything will come out from similar triangles with enough imagination, but maybe it won’t. So that’s why in the video, I split the analysis into an analysis of the configuration itself, and then an analysis of the area condition. What really happens is that we play with the area condition until we get literally anything that looks at all like one of the approaches discussed in paragraph (*). To increase our chances, we need to know as much about the configuration as possible, so any deductions from the areas are strong.

The configuration doesn’t have many points, so there’s not much ambiguity about what we could do. There are two tangents to the circle. We treat APC with equal tangents and the alternate segment theorem to show the triangle is isosceles and that the base angles are equal to the angle at B in ABC. Then point Q is ideally defined in terms of ABC to use power of a point, and add some further equal angles into the diagram. (Though it turns out we don’t need the extra equal angle except through power of a point.)

So we have some equal angles, and also some length relations. One of the length relations is straightforward (AP=CP) and the other less so (power of a point ). The really key observation is that the angle-chasing has identified

which gives us an alternative goal: maybe it will be easier to show that PAQ is a right-angle.

Anyway, that pretty much drinks the configuration dry, and we have to use the area condition. I want to emphasise how crucial this phase in for this type of geometry problem. Thinking about how to prove the goal, and getting a flavour for the type of relation that comes out of the configuration is great, but now we need to watch like a hawk when we play with the area condition for relations which look similar to what we have, and where we might be going, as that’s very likely to be the key to the problem.

We remarked earlier that we’re aiming for angles, and are given areas. A natural middle ground is lengths. All the more so since the configuration doesn’t have many points, and so several of the triangles listed as having the same area also have the same or similar bases. You might have noticed that ABC and BCQ share height above line AQ, from which we deduce AB=BQ. It’s crucial then to identify that this is useful because it supports the power of a point result from the configuration itself. It’s also crucial to identify that we are doing a good job of relating lots of lengths in the diagram. We have two pairs of equal lengths, and (through Power of a Point) a third length which differs from one of them by a factor of .

If we make that meta-mathematical step, we are almost home. We have a relation between a triple of lengths, and between a pair of lengths. These segments make up the perimeter of triangle APQ. So if we can relate one set of lengths and the other set of lengths, then we’ll know the ratios of the side lengths of APQ. And this is excellent, since much earlier we proposed Pythagoras as a possible method for establish an angle is a right-angle, and this is exactly the information we’d need for that approach.

Can we relate the two sets of lengths? We might guess yes, that with a different comparison of triangles areas (since we haven’t yet used the area of APC) we can find a further relation. Indeed, comparing APC and APQ gives CQ = 2PC by an identical argument about heights above lines.

Now we know all the ratios, it really is just a quick calculation…

[1] – I discussed the notion of adding extra points when the scripts for the recording were being shared around. It was mentioned that for some people, the requirement to add extra points (or whatever) marks a hard division between ‘problems they can do’ and ‘problem they can’t do’. While I didn’t necessarily follow this practice while I was a contestant myself, these days the first thing I do when I see any angles or an angle condition in a problem is to think about whether there’s a simple way to alter the configuration so the condition is more natural. Obviously this doesn’t always work (see [2]), but it’s on my list of ‘things to try during initial thinking’, and certainly comes a long way before approaches like ‘place in a Cartesian coordinate system’.

[2] – Well, I could actually find something suitable, but I couldn’t initially turn it into a solution. The most natural thing is to reflect P in AC to get P’, and Q in BC to get Q’. The area conditions [AP’C]=[ABC]=[BCQ’] continue to hold, but now P’ and B are on the same side of AC, hence P’B || AC. Similarly AQ’ || BC. I see no reason not to carry across the equal length deductions from the original diagram, and we need to note that angles P’AC, ACP’, CBA are equal and angles Q’AB and BAC are equal. In the new diagram, there are many things it would suffice to prove, including that CP’Q’ are collinear. Note that unless you draw the diagram deliberately badly, it’s especially easy accidentally to assume that CP’Q’ are collinear while playing around, so I wasted quite a bit of time. Later, while writing up this post, I could finish it [3].

[3] – In the double-reflected diagram, BCQ’ is similar to P’BA, and since Q’C=2P’C = P’A, and Q’B=AB, you can even deduce that the scale factor is . There now seemed two options:

- focus on AP’BC, where we now three of the lengths, and three of the angles are equal, so we can solve for the measure of this angle. I had to use a level of trigonometry rather more exotic than the Pythagoras of the original solution, so this doesn’t really serve purpose.
- Since BCQ’ is similar to P’BA and ABQ’ similar to CP’A, we actually have Q’BCA similar to AP’BC. In particular, , and thus both are 90. Note that for this, we only needed the angle deductions in the original configuration, and the pair of equal lengths.
- There are other ways to hack this final stage, including showing that BP’ meets AQ’ at the latter’s midpoint, to give CP’Q’ collinear.